Bosch D1260 Owner's Manual page 18

Part I: Security System Basics
Special System Trouble Display
Entry Delay Tone and Display
When you enter an armed system
through a point programmed for
entry delay, the command center
emits a repeating warble tone and
displays the following to remind you
to turn off your security system.
If you fail to turn off the security system before the entry delay time expires, it may sound the burglary tone and may also
send an alarm report to your security company.
Exit Delay Tone and Display
After you arm your system, the command center emits a repeating beep tone,
displays AREA 1 NAME TEXT is now arming... then
EXIT NOW! and counts down the exit delay time.
Keystroke Checking Tones
Valid Entry
If you press an appropriate key for the function or entry you desire, the command center emits a muted beep tone,
indicating it accepted your keystroke.
Invalid Entry
A flat buzz tone sounds when you perform a function that is not allowed or when the command center has no
information to display.
D1260 Owner's Manual
50410C © 2003 Bosch Security Systems