Bosch D1260 Owner's Manual page 122

Part IV: Multi-Area Use
Turning Off the System
7. If the entered passcode is valid, the display changes to
show DISARM ALL?
Press the Disarm> soft key to disarm all armed areas.
Press the Next> soft key to go to the first armed area
(see Turning Off Selected Areas).
Press the <Previous soft key to go to the last armed area.
Press the <Exit soft key to return to idle text.
8. If the Disarm> soft key is pressed to disarm all areas,
the display changes to show Disarm: 12345678 All
user-authorized areas are now disarmed. indicating
that all areas are being turned off. Command center
scope and/or your authority level limit the actual
number of areas you may turn off.
For example, if you have authority to disarm all 8 areas but the scope of the command center you're
using is limited to areas 1, 2, and 5, then you will only be able to turn off areas 1, 2, and 5.
50410C
D1260 Owner's Manual
© 2003 Bosch Security Systems