Bosch D1260 Owner's Manual page 93

Adding/Changing a User's Name
1. Pressing the Name> soft key will change the display to
<? JANE DOE
(JANE DOE is used as an example.)
2. To change the name use the following soft keys:
•
<? JANE DOE
Pressing this soft key will display a series of help screens where the keypad can be used to enter
specific letters.
•
<Back-Char List-Fwd>
Pressing either of these soft keys will cause the currently underlined character to change the
previous or next character in the list. The available characters are A-Z, 0-9, @, #, $, &, *, /, -, _, ?,
and +.
•
<Left---POS---Right>
Pressing either of these soft keys will cause the cursor of the currently underlined character to
move left to the previous position in the name or right to the next position in the name.
Another option is to use the numeric keys to add characters to the text.
For the keys with letters, pressing the digit will allow you to cycle
through the letters on the key. For instance, pressing '2' will display an
A. Pressing it again will display a B, and pressing it a third time will
display a C.
The '0' (zero) key will display a 0. The '1' key functions like a space bar
- it puts a space in the current position, and advances to the next
position.
3. Once the name appears as desired, press the
Continue> soft key.
4. The display will change to New user name is JANE
DOE Is this correct?
At this point you can accept or reject the changes.
Press the Yes> soft key to
accept the name and
return to the main
Add/Change Menu
(depending on panel
model).
Press the <No soft key to reject the name and return to step 1.
© 2003 Bosch Security Systems
Part III: Advanced Commands
ADD/CHANGE USER (COMMAND + 5 + 6)
D9412/D7412:
D1260 Owner's Manual
D9112/D7212:
50410C