Bosch D1260 Owner's Manual page 71

The display changes to show that all the doors are at a
normal state except for Door 3, which is unlocked.
4. Enter another door number to unlock or press the
Exit> soft key to leave this function.
Secure Door
1. If you wish to secure an access door to prohibit access,
regardless of a user's authority level, press the Secure
Door> soft key.
2. The display will read *Secure Door*1 2 3 4 5 6 7 8 if all
door are at a normal state and are available.
If a door is not at a normal state, the
number of the door would be replaced
with a symbol indicated in the table:
3. Enter the number of the door you wish to secure then press the ENTER key. This door
will be secured and the display will change to reflect the new status of the doors.
For example, if you wanted to secure Door 3, press 3
then press the ENTER key.
The display changes to show that all the doors are at a
normal state except for Door 3, which is secured.
4. Enter another door number to secure or press the
Exit> soft key to leave this function.
© 2003 Bosch Security Systems
Part III: Advanced Commands
DOOR CONTROL (COMMAND + 4 + 6)
Symbol Meaning
- Door is not active, in scope, or user does not have
access level authority.
C Door is on timed door sequence.
U Strike and shunt are latched active (held open).
X Strike and shunt are deactivated (secured).
F There is a problem with the door. Call your security
company.
D1260 Owner's Manual
50410C