Bosch D1260 Owner's Manual page 123

Turning Off Selected Areas
If your passcode has the proper authority level this function allows you to turn off areas other than the one you are in.
1. The display initially shows that the system is armed.
2. Press the Menu> soft key to enter the Command
Menu.
3. Press the Next> soft key repeatedly until you reach the
DISARM ?> prompt
4. Press the adjacent soft key.
5. If entering through a door which is part of an area that
is armed, the display changes to show:
6.
Enter your passcode and press ENTER.
The passcode is shown as asterisks (*) when entered
and advance from the right side of the display to the
left until all six passcode digits are entered.
7. If the entered passcode is valid, the display changes to
show DISARM ALL?
Press the Disarm> soft key to disarm all armed areas.
8. Press the Next> soft key to go to the first armed area
(see Turning Off Selected Areas).
9. The display changes to show DISARM AREA 1 ? (or
the first area that is armed).
Press the Disarm> soft key to disarm this area.
Press the Next> soft key to scroll through the
remaining areas you have the authority to turn off.
To disarm the area, press the Disarm> soft key.
10. After turning off other areas, the command center's
display returns to the idle text for the area you are in.
© 2003 Bosch Security Systems
D1260 Owner's Manual
Part IV: Multi-Area Use
Turning Off the System
50410C