Turning Off The System - Bosch D1260 Owner's Manual

Turning Off the System

Turning Off Multiple Areas with a Passcode
This function is useful for turning off multiple areas with a few keystrokes. It is quicker than disarming several areas
independently. Your passcode must have the proper authority level for each area.
•
After enter your passcode, the following will display Disarm:
12345678 All user-authorized areas are now disarmed. (Not
all area number may appear due to what areas are in the
scope of the command center.
•
When an area is turned on (armed), you must enter a door programmed for entry delay time. Opening the
door, starts the entry delay time. Failing to turn off the system before the entry delay time expires or
entering through a door not programmed for entry delay time, causes an alarm.
•
If this happens, silence the alarm by entering your personal passcode and pressing ENTER. Call your
security company to let them know that it is not an emergency situation.
Turning Off Multiple Areas with Disarm All
•
This function turns off multiple areas with a few keystrokes. It is quicker than disarming several areas
independently. Your passcode must have the proper authority level for each area. This function works the
same as entering your passcode to disarm, but allows the Disarm All feature to be included in the
Command Menu.
•
When an area is turned on (armed), you must enter a door programmed for entry delay time. Opening the
door, starts the entry delay time. Failing to turn off the system before the entry delay time expires or
entering through a door not programmed for entry delay time, causes an alarm.
•
If this happens, silence the alarm by entering your personal passcode and pressing ENTER. Call your
security company to let them know that it is not an emergency situation.
1. The display initially shows that the system is armed.
2. Press the Menu> soft key to enter the Command
Menu.
3. Press the Next> soft key repeatedly until you reach the
DISARM ?> prompt
4. Press the adjacent soft key.
5. If entering through a door which is part of an area that
is armed, the display changes to show:
6. Enter your passcode and press ENTER.
The passcode is shown as asterisks (*) when entered
and advance from the right side of the display to the
left until all the passcode digits are entered.
© 2003 Bosch Security Systems
D1260 Owner's Manual
Part IV: Multi-Area Use
Turning Off the System
50410C