Bosch D1260 Owner's Manual page 106

Part III: Advanced Commands
SERVICE MENU ? (9 + 9 + Enter)
4. Press either the Enter> soft key or the ENTER button
5. If the date entered is valid, the first event for that date
will appear.
Press the <Exit soft key to exit this function and return
to idle text.
If the date entered is invalid (there are no events with
that date in the log), it will display the next latest event
in the log.
Press the <Exit soft key to exit this function and return
to idle text.
6. The display will show one of two ways depending on if the date entered was for an event first in the
log or not.
•
If the date was for the first event in the log, it will
display the next latest event in the log.
Press the <Exit soft key to exit this function and
return to idle text.
•
If the date was for the an event (not the first) in
the log, the display will be the same except the
<Previous soft key has been added.
Press the <Exit soft key to exit this function and
return to idle text.
7. Press the Next> soft key to go to the next event in the
log.
If there are no more events in the log, *End of Log*
will appear.
Press the <Previous soft key to go to the previous event in the log.
Press the <Exit soft key to exit this function and return to idle text.
Using Print Log
1. Press the Print Log ?> soft key.
2. The display changes to Enter start date:
Press the Print all events> soft key to print all events in
the log.
Press the <Exit soft key to exit this function and return
to idle text.
The events are sent to a
connected printer and
display changes to
Printing all events in
history for three
seconds before
returning to idle text.
50410C
D1260 Owner's Manual
© 2003 Bosch Security Systems