Part Ii: System Commands - Bosch D1260 Owner's Manual

Part II: System Commands

Below is a summary of the commands covered in this section.
Note: Some of these functions may not be available in your system.
Please consult your security company to determine which
commands have been made available to you.
If you attempt to enter a function that's not available or if the
function is available in the system but your passcode is not
authorized to perform the function, then **No Authority** will
display on the Command Center.
Press the COMMAND key and then the one or two digits shown in the table below to perform the function. When you
use a command to perform a function, the displays in the function list below do not appear at your command center.
Note: Some commands listed below may not be available. Contact your security company for more information.
COMMAND
+
+
© 2003 Bosch Security Systems
Function
Master Arm
Master Arm Instant
Perimeter Instant
Perimeter Delay
Silence Trouble Sounder &
Clear Trouble Display
View Memory
D1260 Owner's Manual
Part II: System Commands
COMMAND Function
Walk Test
+
Reset Sensors
+
Watch Mode
Special Alert
Perimeter Partial
Special Alert
50410C