Getting Started Embroidering - Husqvarna Viking Designer topaz 25 User Manual

GETTING STARTED EMBROIDERING

1. Attach the embroidery unit. The machine starts up in
Embroidery Mode. A pop-up message prompts you to
clear the embroidery area for calibration. Press OK to
calibrate and move the embroidery arm to ready position.
2. The load menu automatically opens. Make sure that the
is placed in the center of the hoop.
3. Attach the embroidery foot and insert a bobbin with
lightweight bobbin thread.
4. Hoop a piece of fabric and stabilizer and slide the hoop
onto the embroidery arm.
5. Your machine automatically selects the smallest hoop
matches the hoop size shown on the GraphicDisplay or
change hoop size by pressing the Hoop Options button
block list. To show the complete color block list on the
GraphicDisplay press the Embroidery Info button.
embroidery arm and the hoop. Hold the needle thread
machine starts embroidering.
E S U 65
MBROIDERY ET P