Twin Needle; Stitch Width Safety; Free Motion Floating; Free Motion Spring Action - Husqvarna Viking Designer topaz 25 User Manual

FIX AUTO
(ONLY IN SEWING MODE)
the beginning of each stitch. Your setting will be saved even when the
machine is turned off.
SELECTIVE THREAD CUTTER AUTO
the machine is turned off.

TWIN NEEDLE

If you are using a twin needle, set the size of the needle to limit the
width of all stitches and prevent needle breakage. Activate or deactivate
the twin needle function with the OK button and use the left/right
arrow buttons to set the twin needle size. Your setting will be saved
even when the machine is turned off. A pop-up message reminds
you of the setting when you turn on the machine. Close the pop-up
message by pressing OK.
Note: You cannot set the twin needle size if the Stitch Width Safety is on, or turn
on the Stitch Width Safety if the machine is set for twin needle.

STITCH WIDTH SAFETY

straight stitch needle plate or a straight stitch presser foot. The stitch
width will be limited to zero for all stitches to prevent damage to the
needle, presser foot and needle plate. This setting is saved when the
machine is turned off. A pop-up message reminds you of the setting
when you turn on the machine. Close the pop-up message by pressing
OK.

FREE MOTION FLOATING*

teeth recommendation will be activated. The setting remains when the
machine is turned off. A pop-up reminds you of the setting when you
turn on the machine. Close the pop-up message by pressing OK.
Note: You cannot set the machine in Free Motion Floating Mode if Free Motion
Spring Action is activated or vice versa.

FREE MOTION SPRING ACTION**

The setting remains when the machine is turned off. A pop-up message
reminds you of the setting when you turn on the machine. Close the
pop-up message by pressing OK.
Note: The machine needs to be set in Free Motion Spring Action Mode when
embroidering with the optional Sensor Q-foot (part number 413192045).
SET Menu, Sewing Mode
When you are sewing free motion at low
speed the foot will raise and lower with
each stitch to hold the fabric on the stitch
plate while the stitch is being formed. When
fabric while sewing. The feed teeth must be
lowered and the fabric is moved manually. All
follows the up and down movement of the
needle with help of the spring and the arm
on the presser foot. The feed teeth must be
lowered and the fabric is moved manually. It
intended for straight stitch sewing.
S
ETTINGS
& F 31
UNCTION BUTTONS