Exclusive Sensor System - Husqvarna Viking Designer topaz 25 User Manual

FUNCTION BUTTONS
(Embroidery Mode functions are in brackets)
2
1
7
8
9
If no hoop is attached, the embroidery
IN EMBROIDERY MODE:
unit will move the embroidery arm to Park Position when
machine will move the hoop forward, towards you, for easy
6. SPEED + AND -
All stitches in your machine have a pre-
IN SEWING MODE:
- to increase or decrease the sewing speed. The speed level
is shown on the GraphicDisplay. You cannot select a higher
speed than the max speed for the selected stitch.
When sewing with metallic threads, or when sewing on
delicate fabrics, lower the speed for optimal results.
Each stitch type in a design has a
IN EMBROIDERY MODE:
pre-set maximum speed at which it can be sewn. To reduce
the speed when using specialty threads or embroidering on
delicate fabrics, press
press
7. SENSOR FOOT UP AND EXTRA LIFT
IN SEWING MODE:
foot. Press it a second time and the presser foot will raise to
Extra Lift.
IN EMBROIDERY MODE:
to lift the presser foot to Up position. Press once more and
the presser foot will raise to Extra Lift, to make it easier to
insert or remove the hoop.
8. SENSOR FOOT DOWN AND PIVOT
IN SEWING MODE:
button and the presser foot will be completely lowered. The
position over the fabric for easier placement of the fabric.
3 4
. To increase the speed again
raise the presser
5 6
The presser foot will be lowered automatically when you start
sewing. You can also tap the foot control to lower the presser
foot.
When you stop with the needle in the down position, the
presser foot is automatically lifted to pivot position. This
IN EMBROIDERY MODE:
9. REVERSE
before starting to sew. The reverse indicator will be lit and
the machine sews in reverse until you press the button again
to cancel. If you press the reverse button while sewing, the
machine will sew in reverse for as long as you keep the button
pressed. The reverse indicator is lit when the reverse button is
pressed.
Reverse is also used when sewing buttonholes, bartacks and
darning stitches to step between the parts of the stitch.
Reverse has no function in Embroidery Mode.

EXCLUSIVE SENSOR SYSTEM

the presser foot continuously senses the thickness of fabric,
whether in sewing mode or embroidery mode, and sews over
the fabric smoothly and evenly with perfect fabric feeding.
presser foot pressure for the selected fabric and adjust the
presser foot pressure.
™
™ feature,
S & F
ETTINGS UNCTION BUTTONS
27