Delete Program; Commands Removed From Program - Husqvarna Viking Designer topaz 25 User Manual

Delete program?

choosen to delete an entire program in Programming Mode.
The combination of commands is incorrect
If you are programming stitches or letters and try to insert any
stitch program in an order that is not allowed, this message
will appear. Close the pop-up message by pressing the OK
button.

Commands removed from program

If you try to insert a previously saved program into a new one,
the result may be that the commands are put in an order that
is not allowed. To avoid this, the commands will be removed
from the program. Close the pop-up message by pressing the
OK button.
Overwrite?
If you choose to save a stitch or a program in a memory that
is not empty this message will appear asking if you wish to
overwrite the previously saved stitch/program with the new
OK button.
Delete?
No with the arrow buttons and press the OK button.
46