Change Thread Color; Design Includes Elements That Cannot Be Opened - Husqvarna Viking Designer topaz 25 User Manual

Bobbin thread low
When the bobbin thread is running low, a pop-up message
appears giving you an advanced notice that you'll soon need
to change the bobbin. This gives you an opportunity to
plan when you want to change your bobbin. If you want to
foot control without pressing the OK button.
When changing the bobbin, press the OK button to close
the pop-up and select Bobbin Position in the Hoop Options
Menu. The hoop will move away for easy access to the bobbin
Hoop Options Menu to move the hoop back to where the
embroidery stopped.
to resume the embroidery.

Change thread color

When it is time to change the needle thread the machine stops
and the upper thread is cut. Change the spool and re-thread
the machine. The next recommended color is shown in the
pop-up message.

Design includes elements that cannot be opened

embroidery machine. Please use the downloadable software to
re-save the design, see page 24.
Remove the hoop
This pop-up will appear when a function has been chosen
that forces the embroidery unit to move outside the limits for
the attached hoop. In order for the embroidery arm to move
freely, remove the hoop and then press the OK button.
Connect USB embroidery stick
connected, this pop-up message will appear. Connect a
removed while a design is being loaded or stitched out.
E M 75
MBROIDERY ODE