Delete Stitches Or Letters; Add Commands; Adjust A Single Stitch Or Letter - Husqvarna Viking Designer topaz 25 User Manual

ADD STITCHES OR LETTERS AT OTHER
POSITIONS
If you wish to add a stitch or letter at another position in the
program, move the cursor by pressing the arrow buttons. The
stitch or letter will be inserted to the right of the cursor.
Note: When programming letters, press the arrow down button to activate
the cursor in the stitch program instead of in the alphabet.
ADD THE SAME STITCH SEVERAL TIMES
If you want to add the same stitch several times in a row you
A
been inserted. The same stitch, including any adjustments you
have made to the stitch, will be inserted each time you press
OK.
You can also move the cursor to select another stitch and
press the OK button. The selected stitch will be inserted once
more to the right of the selected stitch.

DELETE STITCHES OR LETTERS

To delete a stitch in the program, select the stitch with the
cursor by pressing the arrow buttons and press the Delete
To delete the whole program, move the cursor to the left of
the arrow buttons and press OK.

ADD COMMANDS

The commands
added to the program. Each command takes one memory
space in the program.
Note: If Auto FIX is activated on your machine you do not need to add
a FIX in the beginning of the program.
Add commands
JOIN TWO STITCH PROGRAMS INTO ONE
You can add a previously saved program to a new one in
program will be inserted in Programming Mode to the right
of the cursor.

ADJUST A SINGLE STITCH OR LETTER

To adjust the settings of a single stitch in a program you must
select the stitch in Programming Mode. You can adjust the
stitch width, stitch length, density or needle position or mirror
the stitch. The settings for the selected stitch are shown on
Adjust a single stitch or letter
between different settings.
40