Hem; Jeans Hem - Husqvarna Viking Designer topaz 25 User Manual

HEM

are selected.

Jeans Hem

When sewing over seams in extra heavy fabric or a blue
jeans hem, the foot can tip as it rides over the seam. Use the
multipurpose tool to balance the height of the presser foot as
you sew.
Denim fabric.
FABRIC:
Woven heavy and Hem.
SELECT:
Presser foot B as recommended and size 90 needle.
USE:
Press Needle Up/Down to select the needle down position.
Begin sewing the bottom hem at or near the center back. As
you near the side seam, stop sewing. Your machine stops with
the needle in the fabric and raises the presser foot. Insert the
multipurpose tool from behind.
Both sides of the multipurpose tool are raised. Use the side
on the foot control to lower the presser foot and continue
sewing slowly over the thick seam.
insert it under the presser foot from the front.
once again. The needle is in the fabric, and the presser foot
lifts. Remove the multipurpose tool. Continue sewing the hem.
Stretch Hem
™
recommendations given on the GraphicDisplay.
stitch from the right side. Trim away excess fabric. Use this
52
feature will select the visible or topstitch hem that is best for your
™
Flatlock stitch to hem stretch fabric and
for belt loops.
7