Audible Alarm; Software Version - Husqvarna Viking Designer topaz 25 User Manual

BUTTONHOLE BALANCE
1:25, the columns in the buttonhole stitch will be sewn in different directions.
On some fabrics this may cause the columns to appear with different density.
Use the left/right buttons to balance the density between -7 and 7. The changes
only affect the selected stitch. If another stitch is selected or the same stitch is
selected again, the value is reset to the default value.
AUTOMATIC JUMP STITCH TRIM
is completed. Use the OK button to turn on or off the function. As you
embroider, your machine will trim the top jump stitch thread and pull the thread
end to the underside of the fabric. This setting is saved even if the machine is
turned off.
Note: The machine will also cut the thread after you have changed to a new color. Hold the
thread end when you start embroidering again, so that you can easily remove the thread end
when cut.
Designs marked with this symbol are programmed for Automatic Jump
Stitch Trim. Jump stitch trim commands can be added to any design using the
downloadable software. See page 24.
Note: If the front and back of your embroidery will be visible, turn off the Automatic Jump
Stitch Trim and cut the threads manually.
MY HOOPS
(ONLY IN EMBROIDERY MODE)
Use the right arrow button to open a menu where you can set the hoops you
own. Use the OK button to select or deselect a hoop. When you load a design
among the hoops that you have set. If none or all hoops are selected in the My
Hoops list you will be able to select from all hoops in Embroidery Mode. Press

AUDIBLE ALARM

Turns on or off all alarm sounds of the machine. Default setting is on. This
setting is saved even if the machine is turned off.
CONTRAST
Adjust the contrast of the GraphicDisplay by using the left/right arrow buttons.
The value can be set between –20 and 20 in steps of 1. The setting is saved
even when the machine is turned off.
LANGUAGE
Use the left/right arrow buttons to change the language of all text in your
machine. The language setting is saved even when the machine is turned off.

SOFTWARE VERSION

The currently loaded software version for the sewing machine is displayed.
32
(ONLY IN SEWING MODE)
(ONLY IN EMBROIDERY MODE)
SET Menu, Sewing Mode
SET Menu, Embroidery Mode
My Hoops Selections Menu
SET Menu, Sewing Mode