Husqvarna Viking Designer topaz 25 User Manual page 46

This stitch cannot be sewn with
Stitch Width Safety on
This pop-up message appears when the machine is set for
mm.
Restart the buttonhole?
If you are sewing a buttonhole and stop to adjust the length
buttonhole from the beginning with the new settings. If you
continue sewing the rest of the buttonhole with the previous
press the OK button.
Sensor One-Step Buttonhole Foot line up
- "Adjust white area to white line"
When you insert the fabric for sewing a buttonhole, the wheel
pop-up message prompts you to line up the white area with
the white line. Line up the white areas and close the pop-up
message by pressing the OK button.
Sensor One-Step Buttonhole Presser Foot
connected
the buttonhole stitches recommended for the foot. If the
a stitch that is not possible to sew with the foot, this message
will appear when you start to sew. Remove the foot or select
OK button.
Machine set for free motion sewing
on the machine. Close the pop-up message by pressing the
OK button.
Bobbin thread low
When the bobbin thread is running low, a pop-up message
appears giving you an advanced notice that you'll soon need
to change the bobbin. This gives you an opportunity to
plan when you want to change your bobbin. If you want to
continue sewing without changing the bobbin, touch the foot
control, but do not close out the pop-up.
44