Embroidery Information - Husqvarna Viking Designer topaz 25 User Manual

DELETE A LETTER
To delete a letter select the letter with the cursor by pressing the arrow
position and press the Delete button. A pop-up message will appear
buttons and press OK.
LOAD TEXT TO EMBROIDERY
the text to Embroidery Mode. The text is now handled as one design
and you can make adjustments on the entire text. If you wish to go
back to the text editor and make further adjustments on the text
before stitching it out press the PROG button in Embroidery Mode.
Note: All adjustments made in Embroidery Mode will be cancelled if you go back
to the text editor.

EMBROIDERY INFORMATION

To view information about a design before loading it to Embroidery
number of stitches and color blocks in the design.
Press the left arrow button to close the Information view and go back
to the load menu.
When you have loaded a design into Embroidery Mode, press the
Embroidery Info button to view information about the current
design.
1. Design name
2. Number of color blocks in the design
3. Number of stitches in the design
4. Color block list. All colors in the loaded design are shown in the
order they will be embroidered. The current color block is always
placed at the top of the list and is marked with a thread spool.
Each listed color shows order, name, thread manufacturer and
color code. Use the up/down buttons to scroll through the list.
manufacturers and thread type abbreviations. See page 24.
Press the Embroidery Info button once more to close the information
view.
70
Embroidery Info
1
2
3
4
thread
B
A
C