Getting Started Embroidering - Husqvarna Viking Designer Ruby Deluxe User Manual

geTTing sTarTed eMbroidering

1. Always attach the Sensor Q-foot to get the best
result. Read more about attaching the presser foot
on page 2:8. After attaching the embroidery unit and
embroidery foot, insert a bobbin with bobbin thread.
2. Touch the Start Menu. The Design Menu opens to
select a design. Touch the design you want to stitch out
and it will load to Embroidery Edit.
3. Hoop a piece of fabric and slide the hoop onto the
embroidery arm.
4. When you are ready to embroider, switch from
Embroidery Edit to Embroidery Stitch-Out by
touching the gO! icon on the task bar.
5. Thread the machine with the first color in the Color
Block list.
E S U
mbroidEry Et p
6:5