Spool Pins And Spool Caps - Husqvarna Viking Designer topaz 25 User Manual

SPOOL PINS AND SPOOL CAPS

Your sewing machine has two spool pins, a main spool pin and an auxiliary spool pin. The spool pins are designed for all types
for large spools or specialty threads.
HORIZONTAL POSITION
Lift the spool pin up slightly from its horizontal position to
easily place the thread spool on the pin. The thread should reel
over the top, in a counterclockwise direction, as shown in the
A
to the horizontal position.
Each machine comes with two spool caps on the spool pin.
large
the spool. There should be no space between spool cap and
B
thread spool.
A small spool cap is included as an accessory for your
machine. The small spool cap can be used for small thread
spools.
Note: Not all thread spools are manufactured in the same way. If you
experience problems with the thread, turn it in the opposite way or use the
vertical position.
VERTICAL POSITION
Lift the spool pin up and all the way to the right. Lock the
spool pin in the vertical position by slightly pressing it down.
medium size spool cap or when using specialty threads, place
a felt pad under the thread spool to prevent the thread from
needed.
Note: No spool cap should be placed on top of the spool as this prevents
the spool from rotating.
AUXILIARY SPOOL PIN
The auxiliary spool pin is used when winding a bobbin from
a second spool of thread or for a second spool when sewing
with a twin needle.
place a felt pad under the thread spool to prevent the thread
not be used.
14