Overview; Sewing Mode - Husqvarna Viking Designer topaz 25 User Manual

SEWING MODE

selected by default.

OVERVIEW

1. Recommended needle for the selected fabric, in this case a
Universal 80 needle. If twin needle is activated the selected
twin needle size will be shown. An arrow next to the needle
icon indicates if needle up/down is selected.
2. Recommended presser foot for the selected stitch and fabric.
– or +
5. Needle position is shown instead of stitch width when
straight stitch is selected. Change the needle position by
pressing – or +
6. The selected stitch, both illustrated and displayed by number.
10. Recommendation to use stabilizer under your fabric.
– or +
12. Recommendation to remove presser foot when sewing on
buttons.
13. The icon for lowering the feed teeth is shown when sewing
on buttons is selected and when free motion has been selected
14. Recommendation to use the multipurpose tool/button reed
when sewing on a button.
16. Recommendation for corded buttonhole. When sewing
buttonholes in stretch fabric we recommend to cord the
buttonhole for better durability, see page 54.
17. When sewing a manual buttonhole or the darning program
the reverse icon is shown to indicate that you need to press
Reverse when the buttonhole columns or the darning stitch
are sewn to the desired length.
34
display after you turn on the machine without the embroidery unit connected. Here you
–
+
™
1
2
3
4
A
8
9
12
13
14
C
16
7
6
5
B
10
11
15
17