Husqvarna Viking Designer topaz 25 User Manual page 82

Bobbin alarm does not work?
• Clean lint from bobbin area.
approved for this model.
Thread cutter does not cut?
• Remove stitch plate and clean lint from bobbin area.
Wrong Stitch, Irregular or Narrow Stitches?
• Turn machine off and on to reset.
• Change needle, rethread top and bobbin threads.
• Use stabilizer.
Machine Sews Slowly?
• Check speed.
• Remove stitch plate and brush lint from bobbin and teeth
area.
• Check the foot contol.
• Have your sewing machine serviced at your authorized
Machine Will Not Sew?
• Put bobbin winder spindle to the left into sewing position.
• Check plugs are securely plugged all the way into the
machine.
• Check wall plug and power to wall plug.
• Check foot control connection.
Embroidery puckers?
• Use correct stabilizer - see Accessory User's Guide
• Hoop fabric tightly as described on page 64.
80
® bobbins
® retailer.
Thread loops are forming on the underside of the
embroidery design?
• Has the embroidery built up too much to move freely
under the embroidery foot? Increase the pivot height in
Machine will not embroider?
The sewing and embroidery machine function
buttons do not respond to touch?
• The sockets and function buttons on the machine can be
sensitive to static electricity. If the function buttons do
not respond to touch, turn the machine off and then on
again. If the problem persists, contact your authorized
Have your sewing machine serviced regularly by
your authorized HUSQVARNA VIKING
If you have followed this trouble shooting information and
still have sewing problems, take the sewing machine to your
thread on a scrap of your sewing fabric and bring it to your
sample will often give much better information than words.
Non-Original Parts and Accessories
The warranty does not cover any defect or damage caused by
use of non-original accessories or parts.
retailer.
®
Retailer!
®
® retailer. If there is
® retailer. A sewing