Darning And Mending - Husqvarna Viking Designer topaz 25 User Manual

DARNING AND MENDING

Darning a small hole or a tear before it becomes larger can
your garment as possible.
1. Place the fabric in position under the presser foot.
3. Once over the hole, press the Reverse button. Continue
sewing. The machine sews back and forth across the hole
14 times and then stops.
button. Reposition your fabric, then step on the foot
control to sew again. The stitch will now repeat the same
when the stitch is completed.
BARTACK (MANUAL)
corners with the same look as ready-to-wear.
1. Place fabric under the presser foot.
fabric if necessary.
automatically and stitch.
• Your machine will sew a straight stitch until you press
Reverse .
• Your machine will then sew in reverse until you press
reverse again.
• Your machine will then sew a zigzag, covering the straight
stitches.
• Press reverse to automatically tie off.
Select fabric type and stitch 1:20
Woven Heavy and stitch 1:21
1 2
3 4
S T
EWING ECHNIQUES
57