Unpacking; Getting Ready To Sew; Packing Away After Sewing; Accessory Box - Husqvarna Viking Sapphire 875 Quilt User Manual

Unpacking

1. Place the machine on a sturdy, at surface, remove the
packaging and lift off the cover.
2. Remove the packing material and the foot control.
3. The machine is delivered with an accessory bag, a power cord
and a foot control cord.
4. Wipe the machine, particularly around the needle and stitch
plate to remove any soil before sewing.

Packing away after sewing

1. Press the ON/OFF switch to OFF.
2. Unplug the cord from the wall socket and then from the
machine.
3. Unplug the foot control cord from the machine. Wind the
foot control cord inside the space on the underside of the
foot control.
4. Check to ensure that all accessories are in the accessory box.
Slide the box on to the machine, behind the free arm.
5. Place the foot control in the space above the free arm.
6. Put on the cover.

Accessory box

There are special places for presser feet and bobbins in the
accessory box, plus space for needles and other accessories. Store
the accessories in the box so they are easily accessible.

Extended Sewing Surface

The space at the right side of the needle, between the needle
and the arm, gives you a great deal of extra space. This makes
sewing large projects and quilts much easier than on other sewing
machines. Keep the accessory box on the machine to provide a
large, at work surface.

Using the free arm

Slide the accessory box to the left when you wish to remove it
and use the free arm.
Use the free arm to facilitate sewing trouser legs and sleeve hems.
To replace the accessory box, slide it onto the machine until it ts
in place.

Getting ready to sew

1
7