Connected Line Identification Presentation (Colp); Malicious Call Identification; Mail (User-To-User Signalling, Uus) - ASCOM Eurit 40 Operating Instructions Manual

Supplementary services

Connected line identification presentation (COLP)

When activated, the "COLP" function displays the telephone number of the connection that has
answered your outgoing call. This telephone number is not necessarily the same as the one you
have dialled, e.g. if the called party has forwarded the call.

Malicious call identification

You can have malicious calls registered during the call or within 20 seconds after the caller has
hung up.
To register a malicious call:
The telephone number of the caller, together with the time and date, are registered in the public
exchange.
Registration is not possible in hands-free mode.

Mail (User-to-user signalling, UUS)

Using the "Mail" function you can transmit written messages (mails) from your telephone set or
receive such messages on your own telephone set. The following capabilities exist:
– Deposit mails in your telephone set from where they can be retrieved by other subscribers.
– Send mails.
– Receive mails.
Preconditions for sending and receiving mails:
– The subscriber has a suitable telephone set.
– This service is supported by the public exchanges.
Enter the submenu Settings/Suppl. services.
Press the Display key at COLP.
Save.
Press the Display key at Tel. functions.
Press the Display key at Register (MCID).
51