Alarm - ASCOM Eurit 40 Operating Instructions Manual

Other functions and facilities
Clearing all existing connections
If after a call termination you do not pick up the handset again within approx. 6 seconds even
though additional connections exist, these will also be terminated.
If "Call transfer (ECT) by on-hook" is active, the last 2 connections are interconnected (see
Chapter "Call transfer (ECT) by on-hook", Page 67). The remaining connections are signalled
audibly and visually.

Alarm

You can enter an alarm with date and time. You can define whether this alarm is to be signalled
once or daily. In addition you can identify the alarm by entering a corresponding text that specifies
the time.
Setting an alarm
Q W E E
A S D
I ? Y X X
s h i f t d e l
The function "Alarm active" is signalled on the display by Ó.
Alarm time arrives
The arrival of the alarm time is signalled by a special ringing tone and the symbol Ó
on the display. To return to the basic state:
Press the Display key of the desired telephone number shown on the
display.
Enter the submenu Main menu/Alarm.
Enter the date, time and text.
Repeatedly press the Display key until the desired setting is displayed.
Save the setting.
Press Display key at Stop displaying message.
43