Programming Lock; Displaying The Software Version - ASCOM Eurit 40 Operating Instructions Manual

Other functions and facilities
You want to establish a connection via MSN B. The line is to be seized automatically.
Required macro: MBH1
To establish the desired connection:
Select the required macro from the card file.
Enter the desired telephone number or select the name from the card file.
The connection is set up. MSN B is pre-fixed to the telephone number and also stored in
the redial directory.
You want to transmit your telephone number, e.g. 123 45 67 as a message on a pager that
can be reached under 074 0765 43 21. Proceed as follows:
– Dial the pager number
– Enter a pause for the announcement text
– Switch to DTMF
– Enter your message and terminate it with #
– If required, enter a pause for the announcement text
– Cancel the connection.
Required macro: H107407654321PPPF1234567#PPPH0
To transmit the message:
Select the required macro from the card file.
The pager message is transmitted.
Depending on the network operator, you may also be able to transmit SMS messages. The
procedure is analogous to a pager message (see above).

Programming lock

This function allows you to protect your telephone from unintended programming. When the
"Programming lock" function is switched on, the
mode.
Activating/deactivating the programming lock

Displaying the software version

fi
Enter the menu Settings.
Press the Microphone mute key.
Press the Display key at Lock until >YES< (activation) or >NO<
(deactivation) appears.
Enter the submenu Settings/Miscellaneous.
Press the Display key at SW version.
48
symbol appears on the display in the quiescent