ASCOM Eurit 40 Operating Instructions Manual page 26

Basic settings
If you want the number to be always dialled via a specific provider, you need to preselect the provi-
der at this point:
You can only select pre-programmed providers (see "Programming providers", Page 34).
You do not have to create a complete card file all at once, it can be completed gradually.
You have the following possibilities:
– Setting up a new entry with information on a calling partner while the call is in progress.
Consecutively press the INFO key and the Display key for the displayed telephone number.
The remaining procedure is the same as for setting up a new entry (see Page 18).
– To set up a new card file entry from the LOG directory, the redial directory, or the caller list:
Press the INFO key followed by the Display key.
Press the Display key at No. - > card.
The telephone number is transferred automatically into the new card file entry.
Add the name and optionally the address, etc., as described above.
Cleanup the card file
You can now review the entries in alphabetical order and delete individual entries as desired.
To retrieve the previous or next entry or to delete the displayed entry:
Return to the basic state:
Press the Display key repeatedly at Prov. until the desired provider is
displayed.
Save.
Enter the submenu Main menu/Card file.
Press the Display key at Cleanup.
Press the corresponding Display key.
Press the Escape key.
20