Table of Contents
Advertisement
Programming your telephone
Programming the call parking code
If you wish to set your own call parking code rather than the preset code:
Installation
Park Call-Id:
change
Park Call-Id: 7
ok
If you enter
a call.
Connected Line Identification Presentation/Restriction (COLP/COLR)
This service is also referred to as COLP/COLR or backward identification.
As soon as you accept an incoming call, your number is displayed at the caller's end. So, for
instance in the case of a call transfer, the caller can see which number he is connected to.
If you wish to suppress presentation of your number:
Installation
COLP: on
change
COLP: on
ok
off
Do not confuse the COLP/COLR function with Calling Line Identification Restriction
(CLIR), which allows you to suppress your number for outgoing calls (forward
identification).
Press the MENU key as often as required until
"Installation" is displayed. Press the Foxkey under
repeatedly until "Call-Id" is displayed.
Press the Foxkey under "change".
Enter the desired Call ID (one digit, range
(A Call ID can be deleted by pressing the Foxkey under
"del".)
Press the Foxkey under "ok" to store.
del
instead of
to
, you can enter the parking code each time you park
Press the MENU key repeatedly until the menu
"Installation" is displayed. Press the Foxkey under
menu item "COLP" appears.
Press the Foxkey under "change".
Press the Foxkey under "off" and "ok" to suppress
COLP.
24
to
or
).
until
Hide quick links:
Advertisement
Table of Contents
Need help?
Do you have a question about the Eurit 30 and is the answer not in the manual?