Terminating A Call; One Connection Exists; Several Connections Exist - ASCOM Eurit 40 Operating Instructions Manual

Terminating a call

One connection exists

or
When listening by loudspeaker/hands-free mode is active:

Several connections exist

Terminating the active connection
The active connection is terminated. The other connections are maintained. An audible and visual
signal indicates that other connections still exist. If you subsequently pick up the handset the first
connection shown on the display is activated.
Terminating all existing connections
If after the call termination you do not pick up the handset again within approx. six seconds even
though the existence of other connections is signalled, these connections will be terminated auto-
matically.
If "Call transfer (ECT) by on-hook" is active, the last 2 connections are interconnected (refer to
Section "Call Transfer (ECT) by on-hook", Page 67). The remaining connections are signalled
audibly and visually.
Place handset on-hook or press the END key.
Press the Loudspeaker key.
Place handset on-hook.
27