Headset; Data Preservation In The Event Of Power Failure; Service Menu - ASCOM Eurit 40 Operating Instructions Manual

Other functions and facilities

Headset

Frequent users of the telephone may find it more convenient to connect a headset to the Eurit 40.
When the «Headset» function is activated you can answer or terminate a call via the headset by
pressing the Loudspeaker key.
While the "Headset" function is active the icon

Data preservation in the event of power failure

After a power failure the time information and the alarm time are lost.
After a prolonged power failure (longer than 48 hours) the following are either maintained or lost:
– Still existing: card file, all recorded announcement texts.
– Lost: all other settings.

Service menu

Using the Service menu you can reset to the factory default settings either all functions simulta-
neously or individual functions of your Eurit 40.
You have the following possibilities:
– Full reset: All functions of your Eurit 40 are reset to the factory defaults. All settings you have
made are cancelled.
– Lock: Your telephone set is protected against unwanted program modifications. Programming is
not possible while the "lock" function is active. (Also refer to the Section: "Programming lock",
Page 48).
– Reset PIN code: The PIN code is reset to 1234 (factory default). (Also refer to the Section
"Changing the PIN code for remote message retrieval", Page 62).
– Reset TAD: All announcement texts and all messages on the telephone answering machine are
cancelled.
– Reset card file: All entries are deleted.
To activate the Service menu:
Depending on the desired function:
·
Enter the submenu Settings/Miscellaneous.
Press the Display key at Headset.
Press the Display key at >OFF<.
Save.
Enter the menu Settings.
Press the Microphone mute key.
Press the Display key and follow the prompts on the display.
49
appears on the display.