Parking - ASCOM Eurit 40 Operating Instructions Manual

Other functions and facilities
Delete the call-back

Parking

You can "park" an existing connection for up to a max. of 3 minutes so that you can continue the
call from a different telephone set. It is even possible to unplug the telephone set and to reconnect
it to a different outlet of the same ISDN connection.
You and Mr. Miller have the same ISDN connection but different telephone numbers. You
want to end the telephone call and hand it over (parking) to Mr. Miller so that he can say
goodbye. Mr. Miller accepts (unparks) the call.
The following parking facilities are available:
Automatic parking: The connection is parked automatically. The park code required by the system
is assigned automatically. If you have parked a connection automatically, you can normally unpark it
only on a telephone set of the Eurit family. This does not work if you want to continue the conver-
sation on a telephone set of a different type. (Refer to "Manual parking").
Manual parking: If you park a connection and want to resume the conversation on a telephone
set that is not part of the Eurit family, choose the "Manual parking" function. In this case you must
manually enter the park code required by the system.
Rule of thumb:
– If you park and resume (unpark) a connection between Eurit telephone sets:
Park the connection automatically:
– If you park and resume (unpark) a connection between an Eurit telephone set and another type
of telephone set:
Park the connection manually.
A connection is cleared if it remains parked for longer than 3 minutes.
Parking a call
Automatic parking
Press the Display key at Tel. functions.
Press the Display key at delete call-back.
Press the Display key of the corresponding subscriber number.
Enter the submenu Settings/Suppl. services.
Repeatedly press the Display key at Park until >AUTOMATIC<
is displayed.
37