Telephoning Via Different Providers - ASCOM Eurit 40 Operating Instructions Manual

Other functions and facilities

Telephoning via different providers

Irrespective of your network provider, you can telephone via other providers.
Telephone numbers can be assigned to specific providers as follows:
– You can automatically assign a provider to a prefix or telephone number (see "Programming
provider preselection", Page 35).
– You can assign a card entry to a fixed provider (see "Setting up the card file", Page 18).
This option is given priority over the above-mentioned provider preselection. This means that the
settings made here are executed even if they contradict the "Automatic provider preselection"
settings.
– If necessary, you can assign providers and telephone numbers or card file entries on an individu-
al basis (see "Call-by-call provider selection", Page 36). This option is given priority over the
above-mentioned options. This means that the settings defined here are executed even if they
contradict settings in the above options.
To utilise this option you must pre-program the selected providers in your Eurit 40:
Programming providers
You can pre-program up to seven providers:
Q W E E
A S D
I ? Y X X
s h i f t d e l
To define the provider as a VIP entry (see "Dialling from the VIP directory", Page 22):
You must enter at least one character for the name, otherwise the provider cannot be programmed.
Go to the Functions/providers menu.
Press the Display key at Change provider.
Press the Display key at 1 (for example) to program a provider.
Enter the provider name.
Enter the provider code.
Press the Display key at VIP.
Press the Display key repeatedly at line until the desired number is
displayed.
Save.
34