ASCOM Eurit 40 Operating Instructions Manual page 22

Basic settings
For an MSN which you have defined as "Private" you can record the call announcement
"Private call". When a call is received on this MSN you alternately hear the ringing melody
you have chosen for the corresponding MSN and the announcement "Private call" if you
have set the combination >Melody+MSN<.
Entering the telephone number
When programming the MSN enter the telephone number with area code.
If no further settings are to be made:
If additional settings are desired:
Enter the text, ring melody, volume, ringing delay, MSN call announcement, ring mode per MSN
You can make these settings only if you have entered the corresponding MSN.
You are in the submenu Settings/MSN settings:
Q W E E
A S D
I ? Y X X
s h i f t d e l
If you do not want to audibly signal incoming calls, set the volume to 0.
On the Quiescent display this setting is shown, for example, with Silence: A.
Enter the submenu Settings/MSN settings.
Press the Display key at the desired MSN.
Enter the telephone number with area code.
Save.
Enter the text, e.g. name of the MSN.
Repeatedly press the Display key at Ring melody and Volume
until the desired settings appear.
Press the Cursor key.
Repeatedly press the Display key at Delayed (s) until the desired
delay (in seconds) appears.
16