Using A Headset; Programming Auto-Dial Keys - ASCOM Eurit 30 Operating Manual

Programming your telephone

Using a headset

If you telephone frequently, you can connect a headset to the Eurit and program it to accept and
terminate calls by pressing the loudspeaker key.
Installation
Headset: off
change
Headset: off
ok on
For optimum performance we recommend using a headset from the Ascom range. For
further information please contact the appointed dealer from whom the telephone was
purchased.

Programming auto-dial keys

You can use the auto-dial keys to program frequently used numbers or functions (see under
relevant functions).
Z10:
ok Function
Z10: 06109738400
ok
Press the relevant auto-dial key twice in quick succession (double click) to access the se-
cond memory.
Z10:
ok Function
Z10: F
ok
Press the MENU key repeatedly until menu item
"Installation" appears. Press the Foxkey repeatedly under
until "Headset" appears.
Press the Foxkey under "change".
Press the Foxkey under "on" and "ok" to switch on
headset operation.
a) Programming telephone numbers
Press the MENU key and the selected auto-dial key (single
or double click).
del
Enter the telephone number you wish to store.
Press the Foxkey under "ok" to store the number.
del
b) Programming a function
Press the MENU key as often as required until
"Functions" is displayed, then press the required auto-
del
dial key.
Press the Foxkey under "Function".
del
The required function can be selected from the following
table.
25