Uploading Library Firmware - Quantum Scalar 50 User Manual

Uploading Library Firmware

Quantum Scalar 50 User's Guide
Appendix E Firmware Upgrade Instructions for Stacked Libraries
The screen displays.
Stack role
Note: Make note of the original stack role. You must return the
library to its original stack role after the library firmware
has been updated.
4 Use the up and down arrows to select
The system prompts you with a confirmation screen asking
Standalone and reboot this system?
5 Press .
Yes
The library shuts down. Continue with
After the library stack role is set to
firmware to the cabinet.
To upload library firmware:
1 Connect an Ethernet cable to the left-hand Ethernet port on the
library SCB and to a network host on the same subnet as the library
(see figure 131).
Note: If this was the
Ethernet cable connected to the library SCB.
Uploading Library Firmware
Stand alone
Uploading Library
, you can upload library
Stand alone
library, there will already be an
Master
and press .
Enter
Change to
Firmware.
228