Figure 34 Drive Operations Screen; Table - Quantum Scalar 50 User Manual

Figure 34 Drive Operations
Screen
Quantum Scalar 50 User's Guide
The to screen displays a list of magazine, tape drive, or fixed
Move
slot groups.
4 Use the up and down arrows to select a magazine, tape drive, or fixed
slot group to receive the cartridge and press
The screen displays a list of storage elements within the
Move to
selected magazine, tape drive, or fixed slot group.
5 Use the up and down arrows to select an empty bin to receive the
tape cartridge and press
The
Move in progress
completed the move, a
6 When you are finished moving tape cartridges, press
the screen.
Ops
Drive Operations
To perform a drive operation:
1 From the screen, use the up and down arrows to highlight
Ops
and press
Operations
The
Drive Operations
1 Use the up and down arrows to select a tape drive and press
The following drive options are available (see
Ensure that the tape drive does not contain a tape
Caution:
cartridge prior to powering down the tape drive.
Chapter 2 Basic Library Operations
.
Enter
screen displays. When the tape cartridge has
screen displays.
Success
.
Enter
screen displays (see figure
OCP Components
.
Enter
to return to
Exit
Drive
34):
Enter

table

12):
2
.
49