System Tests; Figure 90 Selftest Page; Quantum Scalar 50 User's Guide - Quantum Scalar 50 User Manual

System Tests

Figure 90 Selftest Page

Quantum Scalar 50 User's Guide

Bridge Rescan
Note: The
Bridge Rescan
bridge is installed in the library.
The bridge rescan button re-discovers any iSCSI bridges installed in the
cabinet. Details of the scan will be presented under
To rescan iSCSI bridges installed in the cabinet:
1 Click
Rescan
The iSCSI bridges are scanned.
The system tests section allows the user to run a series of tests on an
3
individual cabinet axis.
1 To access the
System Test
The
System Test
Chapter 3 Quantum Scalar 50 Remote Management
button only displays if a TC2201 iSCSI
.
page, from the
System Test
tab at the top of the page.
page displays (see
s tab.
Bridge
page, click on the
Utilities
figure 90).
Utilities
3
127