Figure 39 Network Screen; Quantum Scalar 50 User's Guide - Quantum Scalar 50 User Manual

Figure 39 Network Screen

Quantum Scalar 50 User's Guide

Security Setup Description
Set operator The operator PIN only allows access to the
PIN
Ops
any library settings. Select
the operator PIN. use the up and down arrows to
cycle through the PIN numbers. Press
accept each digit and press
digit of the PIN. You must verify the PIN number.
The operator PIN can be 0 to 8 characters long,
numbers only.
Note: OCP passwords are independent of the remote
management passwords.
2 When you are finished viewing/editing the security setup
information, press
Network
To view or edit the network information:
1 From the screen, use the up and down arrows to highlight
Setup
and press
Network
The screen displays (see
Network
Chapter 2 Basic Library Operations
menus of the OCP. The operator cannot change
to return to the
Exit Setup
.
Enter
figure
OCP Components
Info
to set
Set operator PIN
to
Enter
twice after the last
Enter
screen.
39):
or
2
55