Quantum Scalar 50 User's Guide - Quantum Scalar 50 User Manual

Quantum Scalar 50 User's Guide

Online/Offline
The online/offline button allows the user to turn the cabinet online or
offline remotely. The action displayed on the button will depend on the
current state of the library or cabinet. If the library (cabinet) is online,
button will be displayed. If the library (cabinet) is in the offline
Offline
state, an button will be displayed.
Online
To change the library online/offline:
1 Click the button to change the library state to online or offline.
The library changes state to online or offline.
Reboot Library
The button allows you to remotely reboot the library.
Reboot Library
To reboot the library:
1 Click .
Reboot
The library reboots.
Park for Shipping
Note: You must remove all tape cartridges from the library prior to
parking the library robotics for shipment.
The
Park for Shipping
library shipment. This places the library hand in the correct position for
shipment and powers down the library,
library hand restraint on the library hand prior to shipping the library.
Refer to appendix D
library.
Caution: Shipping the library without installing the library hand
restraint may result in damaging the hand.
To park the library hand:
1 Select the cabinet and click the
The library hand moves to the shipment position.
Chapter 3 Quantum Scalar 50 Remote Management
button allows you to remotely park the robot for
HOWEVER
on page 216 for more information on shipping the
button.
Park
Utilities
, you must place the
126
3
3
3