Cabling The Quantum Scalar 50 Series; Figure 8 Rack Space Requirements - Quantum Scalar 50 User Manual

Figure 8 Rack Space
Requirements
Hole pattern
Top of rack
.312 in (7.92 m m)
.625 in (15.9 mm)
.625 in (15.9 mm)
.5 in (12.7 mm)
.625 in (15.9 mm)
.625 in (15.9 mm)
.5 in (12.7 mm)
*1U = 1.75 in (44.45 mm)
Cabling the Quantum
Scalar 50 Series
Quantum Scalar 50 User's Guide
1 Scalar 50 library
module (4U)
Warning: If the rack is empty at the time of installation, do NOT
install the Scalar 50 modules too high in the rack. The
combined weight of the components may cause the rack
to become "top heavy" and unstable if installed in the top
of an empty rack. If installing a multiple library stack,
begin installing the bottom library module first.
After the Quantum Scalar 50 is in its final location, the tape drives and
1
system controller board must be connected to the backup host system(s).
To cable the Quantum Scalar 50:
Chapter 1 Library Description
Getting Started
19