Figure 131 Connecting To The Library Scb - Quantum Scalar 50 User Manual

Figure 131 Connecting to the
Library SCB
Quantum Scalar 50 User's Guide
Appendix E Firmware Upgrade Instructions for Stacked Libraries
Ethernet port
2 Use the OCP to determine the IP address for the library. The
is available from the
information
3 On the host computer, open the internet browser software.
4 In the field, type http://IPaddress/ where IP address is the IP
Address
address for the library.
5 Enter the username and password and click
Note: The default username and password is
The page displays (see
Overview
Uploading Library Firmware
menu.
Info
.
OK
admin
figure 132).
Network
.
229