Figure 121 Network Screen
Quantum Scalar 50 User's Guide
2 Use the up and down arrows to view or edit the date and time
information. Press
3 When you are finished viewing/editing the date and time
information, press Exit to return to the Setup screen.
Setting Network Information
To view or edit the network information:
1 From the Setup screen, use the up and down arrows to highlight
Network and press Enter.
2 The Network screen displays (see
The Network screen allows you to view or edit the following network
settings:
Note:
The network settings (IP address, subnet mask, and
default gateway) are only active when DHCP is disabled.
•
DHCP (default setting)
•
IP address
•
Subnet mask
•
Default gateway
3 Use the up and down arrows to select the network setting you wish
to view or edit and press
When you are finished viewing/editing the network information,
press Exit to return to the Setup screen.
Appendix C Installing the Scalar 50 Library
to accept the new settings.
Enter
figure
.
Enter
Installing the Library
120):
3
212