Call Back - Co Line [Cbck] - Comdial DX-80 Installation & Maintenance Manual

•
Press "Y" (yes) to continue with the save operation.
• Press ° (escape) again to return to the Database Programming menu.
•
Continue making other programming changes or exit PC-DBA programming.
Note: Changes made via PC-DBA are not updated to the DX-80 system memory until a "SEND" function
has been performed. Please refer to the Programming section of this manual to learn more about this
procedure.
Call Back – CO Line
This feature allows you to queue a busy CO line and reserve that CO line for use when it becomes available. This
feature eliminates the need for you to continually observe the line status for availability. You may only have one Call
Back active at any time.
Related Features
Delete all Call Back ( F##)
Related Programming
CO Line Assignment
Operation
1. Press a busy (solid Red LED) CO Line or CO Line group button, or dial a CO Line access group number (9,
800-806, 740~755).
While the busy tone sounds, the display will read:
cbck
2. Press [ ] Interactive Soft Button or Dial [#] on the dial pad.
Confirmation tone will be heard and the display will read:
A few moments later, the display will return to an idle state.
When the selected CO Line, or a CO Line in the selected CO Line group becomes available, fast ringing will
be heard at the extension and the display will read:
reply
3. Press [ ] to be connected to available CO Line, and dial the appropriate number or
del
4. Press [ ] to delete the CO Line callback if necessary.
Conditions
a) During call back alert tones, lifting the handset will directly connect the extension user to the selected CO
Line calling back.
b) Every CO line can have Call Back requests by all extensions at the same time.
c) Every extension may Call Back only one busy CO line at the same time.
d) The Call Back Alerting Ring Time is 10 seconds. If the call back goes unanswered during the 10 seconds
ring time the call back is canceled.
e) CO lines that have Call Back requests will recall the Call Back initiator. The Call Back CO line will become
available to other extensions if the call back extension doesn't answer within 10 seconds.
f) Call Back from an extension using a Pooled Group button for access of CO lines will set the call back to all
the lines in the Pooled Group. When any one of the lines in the Pooled Group becomes available the user
must lift the handset or press the reply soft key to be connected to the available line from the Pooled Group.
g) During the time that the Call Back is recalling the initiator, a new incoming call will take precedence over Call
Back and will be answered when the extension goes off hook.
h) To delete all active Call Back requests sent from your extension dial Feature ##(F##).
P7290 IMM
DX-80 I M
NSTALLATION AND AINTENANCE
CO LN BUSY
CBCK TO LINE
CBCK TO LINE XXX
reply del
3-37
M 03/01
ANUAL
XXX
XXX
[ ]
cbck