Automatic Hold !94 - Comdial DX-80 Installation & Maintenance Manual

Programming via PC-DBA
Note: PC-DBA is a DOS-based programming utility.
•
Enter PC-DBA by typing "DX-80" at the DOS prompt in the PC-DBA working directory and then pressing «.
•
Press any key at the program title page (as it requests) to enter the Main Menu.
•
Select PC-DBA from the main menu.
•
Select Programming from the PC-DBA menu. Then press «.
• Use ¢£¤¥ to highlight "System Application" and then press «.
•
Use ¢£¤¥ to highlight "Time Switching" and then press «.
•
Use ¢£¤¥ to highlight Service Mode for which a time must be input. This screen is read as "FROM' and
"TO" for each day of the week and for the switch modes Alternate and Evening. (It is also split into the three
groups for each of the Tenant Groups.)
•
Press «.
•
Input the time when this service mode should become active in the left column and when it should stop
being active in the right column. When the time has been input, press « to store.
• When all changes are made press the ° (escape) key to exit this database-programming screen. You will
see the prompt: "Exit This Feature"; press "Y" for yes.
•
You will then be prompted to "Save Current Setting?"
•
Press "N" to abort changes and leave all data unchanged.
•
Press "Y" to save changes.
•
If you press "Y" (yes), you will then be prompted "File Exists, Override?"
•
Press "N" to abort changes and leave all data unchanged.
•
Press "Y" (yes) to continue with the save operation.
• Press ° (escape) again to return to the Database Programming menu.
•
Continue making other programming changes or exit PC-DBA programming.
Note: Changes made via PC-DBA are not updated to the DX-80 system memory until a "SEND" function
has been performed. Please refer to the Programming section of this manual to learn more about this
procedure.
Automatic Hold
You may enable this feature on your telephone to simplify call handling and avoid accidental "lost" calls. Automatic
Hold will automatically place any call that is currently connected at your telephone on hold whenever a CO line button
is pressed. For instance, if you are currently on a call on line 1 and you press line 2, the call on line 1 will be placed
on Exclusive Hold automatically. Similarly, if you are currently on an intercom call and talking with another DX-80
extension then press a CO line button, the intercom call will be placed on Exclusive Hold. The need to press Hold is
eliminated, except if you want to place a call on System Hold.
Related Features
CO Line Group
Related Programming
Call Handling - Hold Reminder, Hold Recall
Operation – Setup
!94
1. Press .
2. Confirmation tone is heard and the condition is set. The display shows:
3. The extension is returned to an idle state.
P7290 IMM
DX-80 I M
NSTALLATION AND AINTENANCE
AUTO HOLD ALLOW
3-24
M 03/01
ANUAL
Exclusive Hold
!94