Attendant Administration (Admin.) !-0 - Comdial DX-80 Installation & Maintenance Manual

•
Continue making other programming changes or exit PC-DBA programming.
Note: Changes made via PC-DBA are not updated to the DX-80 system memory until a "SEND" function
has been performed. Please refer to the Programming section of this manual to learn more about this
procedure.
Attendant Administration (Admin.)
Attendant Administration (Admin.) is used to set or modify the features; Service Mode (Day/Alt/Eve/Time), Auto
Attendant Messages (optional Auto Attendant Module required), Temporary Mode, System Speed Dial and FWD
AUXI LAMP. Attendant Administration (Admin.) can be performed at any user extension, but the assigned Attendant
Extension user's password is required.
Related Features
Service Mode
Automated Attendant
Temporary Mode
Related Programming
System Resource - Attendant (Tenant 1-3), Alternate Attendant, System Number Assignment, Speed
Number Programming, User Password
CO Line - Answering Position (Day/Evening)
System Application - Time Switching
Operation
back next
Note: [ ], [ ], [
three buttons below the LCD display to actuate the associated operation.
Note: Before Attendant Administration (Admin.) can begin, you must enter the User Password of the
programmed Attendant extension for the Tenant Group to be administered.
1. At any digital extension enter the Admin. Code
2. Enter the Tenant Group number to be Administered. (Typically Tenant Group 1.)
save
3. Press [ ].
4. Enter the password for this Tenant Group Attendant (default for the Tenant Group 1 Attendant is "9999").
show
5. Press [ ]. The first Admin. item ("SVC MODE CHANGE") displays.
next
6. Press [ ] to move to the next Admin. item or press [
(DAY/ALT/EVE/TIME).
To change Service Mode:
show
1. Press [ ]
chg
2. Press [ ] to toggle and set the service mode. Options are Day, Evening, Alternate, or Time ("Time" mode
follows programming of Time Switching).
3. Press the
next
4. Press [ ]. The Admin. item "AUTO_A MESSAGE" displays.
To change Auto Attendant Messages:
show
1. Press [ ]
back next
2. Press [ ] or [
GREETING, 2. ALT GREETING, 3. EVE GREETING, 4. WAITING MSG., 5. INVALID MSG., 6. BUSY
MSG., 7. NO_ANS. MSG., 8. BYE MSG., 9. INQUIRY MSG., 10. TEMP MSG.
P7290 IMM
DX-80 I
NSTALLATION AND
show chg bksp
], [ ], [ ], and [
SVC MODE CHANGE
back next show
button to exit Service Mode Change and return to the previous menu.
AUTO_A MESSAGE
back next show
] to toggle the ten (10) programmable greetings and messages. These are: 1. DAY
3-9
M M 03/01
AINTENANCE ANUAL
Speed Dial - System
Auxiliary Lamp - CFW
Tenant - Attendant Programming
save
] are interactive LCD button operations. Use the
!(0
.
show
] to show the current service mode
!-0