Attendant - Comdial DX-80 Installation & Maintenance Manual

a) To enter a CO Line Flash ("hook-flash") in a System Speed number, press
indicated by a "/" character. For example to enter "FLASH-1389" in a system speed number the entry would
! 3 1389
be: " + +
b) To enter a Pause in a System Speed Dial, press
For example to enter "9pause18008778000" into a system speed number the entry would be "
70 18008778000
+
"9P18008778000."
c) To chain one speed dial number to another, press
example; if a very long telephone number will not fit into one speed number location, split the number into
two locations. To store the number "123-456-7890-123-456-7890-123-456-7890" into locations 500 and 501,
enter into location 500: "
501
is the second speed number location). Enter into 501: "123-456-7890-123-456-7890." To dial this
number access only location "500."

Attendant

One primary attendant may be assigned in each of the DX-80 system's three (3) Tenant Groups. The standard Digital
Speakerphone will serve as the attendant telephone. When assigned as attendant, this extension supports general
system functions like Line Recall, Forced Incoming ICM Call Forward and manual evening or alternate service mode
operation. The attendant will receive all intercom calls directed to the Attendant Directory Number, ("0" at default).
The attendant extension has an internal call queue that allows multiple intercom calls to be directed to the attendant
at the same time.
A second (alternate) attendant position may be designated in each tenant group for common sharing of incoming CO
line calls or load sharing during peak traffic periods.
The attendant's extension password allows for control of the system service mode (Day/Evening/Alternate/Time),
time of day settings, System Speed Dial number programming, and recording of the optional Auto Attendant
greetings. The attendant extension may be connected to any system station port and be assigned any intercom
extension number in the numbering plan.
Related Features
Do Not Disturb (i.e., Forced DND)
Hotel Mode
Room Status (F7#)
Attendant Administration (F#0):
• Service Mode Change
• Auto Attendant Message Record/Review
• Temporary Service Mode
• System Speed Dial
• Call Forward Auxiliary Lamp
Related Programming
System Resource - Attendant, Attendant - Alternate, User Password
System Application - Operator Code
Operation
1. Any extension may dial 0 to reach the programmed system attendant extension.
2. All unanswered transferred calls will route to the attendant extension.
3. When multiple internal calls are waiting in queue for the attendant extension, the display indicates the
number of waiting calls in the display (the illustration shows two calls waiting):
P7290 IMM
DX-80 I M
NSTALLATION AND AINTENANCE
save
+ [ ]." The displayed system speed number would be "/1389"
!70
save
+ [
123 456 7890
- -
LINE 3 01:45
-->> 2
3-11
M 03/01
ANUAL
!3
. A stored pause is indicated by a "P" character.
]." The displayed system speed number would be
!1
+ the speed dial number location to dial. For
! 1 501
+ + +
Extension User Password (F97)
Caller ID Table (review) (F6#)
Ring Mode (F63)
. A stored "hook-flash" is
9 !
+ +
save
+ [ ]" (where
-