Hold, Common (System) & I-Hold Indication - Comdial DX-80 Installation & Maintenance Manual

Note: Changes made via PC-DBA are not updated to the DX-80 system memory until a "SEND" function
has been performed. Please refer to the Programming section of this manual to learn more about this
procedure.
Hold, Common (System) & I-Hold Indication
You may place any CO line on System Hold by pressing the
the green lamp for that line will flash at the I-Hold rate. This system-hold line will flash the red lamp at all other
extensions.
I-Hold Indication allows you to easily distinguish between a call you placed on hold at your telephone and calls placed
on hold at other telephones. When you place a call on System Hold, the associated line lamp will flash at the System
Hold rate using the green lamp to indicate that this is your holding line. The same held CO line at other extensions
will flash at the System Hold rate using the red lamp.
Related Features
Call Transfer
Hold Abandon
Related Programming
Call Handling - Hold Recall, Hold Reminder, Ex_Hold Time
Operation
1. While on a line, the green lamp for that line is I-Use flashing (double wink rate).
2. Press . The green lamp now flashes at a slow rate and the call is placed on System Hold.
Conditions
a) Pressing Hold will place a conference on Exclusive Hold if you are the controlling party and you temporarily
exit to add another party.
b) When a conference call is placed on Hold, the steady lamp indication at the other extension(s) remains
steady (follows Exclusive Hold functions).
c) Any party who is placed on Hold will hear music only if available through the external music source
connection.
d) Calls placed on Exclusive (private) Hold, which have exceeded the Exclusive Hold programmed time, and
calls recalling from a CO line transfer, will be placed on System Hold automatically.
e) There is a distinctive flash rate for a CO line that is on System Hold.
Default Settings
Call Handling – Hold Reminder is set at "60" seconds.
(Range is: 0-90 seconds, "0" disables the Hold Reminder function.)
Call Handling – SLT Hold Recall is set at "0.5" minutes. (Range is 0-5.0 minutes.)
Call Handling – EKT Hold Recall is set at "0.5" minutes. (Range is 0-5.0 minutes.)
Programming Abstract
•
Program the Hold Reminder Time.
•
Program the Single Line Telephone Hold Recall Time.
•
Program the Digital Extension
Programming via the DET (Digital Extension Terminal)
back next
Note: [ ], [ ], [
three buttons below the LCD display to actuate the associated operation.
•
Enter Database Administration using the feature code
++++++++
"
P7290 IMM
DX-80 I
NSTALLATION AND
show chg bksp
], [ ], [ ], and [
." (Note: This eight-character password can be changed.)
3-147
M M 03/01
AINTENANCE ANUAL
button. When you place a line on System Hold,
Hold Reminder
save
] are LCD interactive button operations. Use the
!+*
and then enter the DB Admin password