Comdial DX-80 Installation & Maintenance Manual page 152

chg
•
Press [ ] to change/enter the digital port directory number where the DSS is connected.
•
Input the directory number of the digital port where the DSS Console is connected, then press [
save
•
Press [ ].
next
•
Press [ ] to enter more DSS Console data.
•
Input the next DSS Unit number (1~12) to program.
show
•
Press [ ].
•
Follow the convention above for all DSS Console programming.
•
Press HOLD button to exit DSS Allocation programming and return to the previous menu level.
•
Continue making other programming changes or exit the programming mode.
Programming via PC-DBA
Note: PC-DBA is a DOS-based programming utility.
•
Enter PC-DBA by typing "DX-80" at the DOS prompt in the PC-DBA working directory and then pressing «.
•
Press any key at the program title page (as it requests) to enter the Main Menu.
•
Select PC-DBA from the main menu.
•
Select Programming from the PC-DBA menu. Then press «.
•
Use ¢£¤¥ to highlight "System Resource." Then press «.
•
Use ¢£¤¥ to highlight "DSS Allocation." Then press «.
•
Use ¢£¤¥ to highlight the DSS to allocate (up to 12 DSS Consoles may be added to the system). When
allocating DSS Consoles, two directory numbers are required, the actual digital extension port directory
number where the DSS Console is connected ("DIR No.") and the Digital Extension Directory Number of the
extension to which this DSS Console is to be associated ("DSS Owner").
•
Press «
.
•
Input the directory number for the selected data item. (For "DIR No." input the directory number of the port
where the DSS console is connected. For "DSS Owner" input the directory number of the extension to be
associated to this DSS Console.)
• Press «
.
This temporarily stores this data while other changes are being made.
• Use ¢£¤¥ to move the cursor to the next database item and input as data as required.
•
When all changes are made press the ° (escape) key to exit this database programming screen. You will
see the prompt: "Exit This Feature"; press "Y" for yes.
•
You will then be prompted to "Save Current Setting?"
•
Press "N" to abort changes and leave all data unchanged.
•
Press "Y" to save changes.
•
If you press "Y" (yes), you will then be prompted "File Exists, Override?"
•
Press "N" to abort changes and leave all data unchanged.
•
Press "Y" (yes) to continue with the save operation.
•
Press ° (escape) again to return to the Database Programming menu.
•
Continue making other programming changes or exit PC-DBA programming.
Note: Changes made via PC-DBA are not updated to the DX-80 system memory until a "SEND" function
has been performed. Please refer to the Programming section of this manual to learn more about this
procedure.Discriminating Ringing.
P7290 IMM
DX-80 I M
NSTALLATION AND AINTENANCE
3-103
M 03/01
ANUAL
save
].