Co Line Queuing / Callback [Cbck] - Comdial DX-80 Installation & Maintenance Manual

•
When all CO Lines to be copied with the copy data have been input press the ESC (escape). At this
time it is possible to input another "Source" CO Line directory number and continue the process for
another group of CO Line(s).
•
When all changes are made press the ° (escape) key to exit this database programming screen. You will
see the prompt: "Exit This Feature"; press "Y" for yes.
•
You will then be prompted to "Save Current Setting?"
•
Press "N" to abort changes and leave all data unchanged.
•
Press "Y" to save changes.
•
If you press "Y" (yes), you will then be prompted "File Exists, Override?"
•
Press "N" to abort changes and leave all data unchanged.
•
Press "Y" (yes) to continue with the save operation.
•
Press ° (escape) again to return to the Database Programming menu.
•
Continue making other programming changes or exit PC-DBA programming.
Note: Changes made via PC-DBA are not updated to the DX-80 system memory until a "SEND" function
has been performed. Please refer to the Programming section of this manual to learn more about this
procedure.
CO Line Queuing / Callback
CO Line Queuing allows a user to request use of a busy CO line. When the CO Line goes idle (current user hangs
up), that CO Line rings the user that queued the line. While the line is ringing at the extension, it is unavailable for
access by other users. If the extension that queued the CO Line does not respond to the queue callback within 8
seconds, the queue is cancelled and the line becomes available for other users.
Related Features
CO Line Groups
Related Programming
CO Line – CO Group
Extension – Line Assignment
Operation – Queue
1. Press a CO Line that is busy or dial access to a CO Line Group (9, 800-806).
The display shows:
cbck
2. Press [ ]. The display shows:
Operation – Queue Callback Answer
1. When the CO Line queued becomes idle, it will Callback ring the extension. The display shows:
2. The user may lift the handset, press the ON/OFF button to activate speakerphone or press [
answer the Queue Callback.
Conditions
An extension must have access to a CO Line via Line Assignment to Queue a CO Line.
Default Settings
N/A
P7290 IMM
DX-80 I M
NSTALLATION AND AINTENANCE
CO LN BUSY XXX
cbck
CBCK TO LINE XX
CBCK TO LINE XX
reply del
3-71
M 03/01
ANUAL
momentarily and then goes idle.
[ ]
cbck
reply
] to